| |
|
|
|
Send your question
- What is the difference of RESURS from other additives?
RESURS is not a simple additive. It is based on nano technology and contains particles to restore and protect the engine. Then RESURS doesn’t change oil viscosity.
- Can I use RESURS with synthetic oil?
Yes, RESURS is compatible with all types of oil. RESURS doesn’t change oil characteristics.
- What dosage should I apply?
The dosage depends on your car engine, year, run and condition. We recommend to use, for example, 50g per 3-5 liters of oil for engines. But if your car engine has excessive noise, oil consumption you can apply bigger volume – 1-3%.
- Can I use my car just after product application?
Yes, you can. After product application you should run min 15 km or more.
- What happens if I use RESURS Diesel in petrol engine?
Nothing bad. RESURS Diesel contains smaller particles than RESURS for petrol engines. You can use RESURS Diesel in petrol engine. But we recommend to use every product for its purpose to get better result.
- What happens if I use RESURS for petrol engines in diesel engine?
We don’t recommend doing it. It may cause problems to your engine.
- Will I see the result just after the product application.
No. You will see the result after several hundreds of km. Usually 400-500 km
- Should I change oil before applying RESURS.
We recommend changing it. RESURS gets result after several hundreds of km after application. So if you put RESURS and than after 200 km change the oil and filter you will not get a result. Change oil and filter before using the product. Or use it on 500-1000 km after oil change.
- Can I use RESURS in new car?
Yes, you can. You should use not more than 50g in new car to protect your engine.
- What is the difference between RESURS Fleet for all types of engine and RESURS Diesel?
RESURS Diesel is only for diesel car engines. You shouldn’t apply it in petrol engines.
- I use RESURS 1st time. What dosage should I apply?
It depends on your car, run, year, etc. You should use 1-3% of RESURS. You can start with 50g or 100g. After 1000 km you can repeat.
- How often should I use RESURS?
We recommend using RESURS every time when you change oil.
- What fuel savings can I expect after treating diesel ship engines with RESURS oil additives?
We can expect 7-10% fuel saving depending on the engine condition.
- I have 8 liters of oil in my mechanical transmission. What dosage should I use?
For mechanical transmission you should apply 50g per 1 liter of oil.
For 8 liters you should apply 400g of RESURS.
Use RESURS Fleet for transmissions 150g and after 300-500 km add another bottle of 150g. Wait for the result. If it is not enough. Apply again 150g. Depending on condition of your transmission use 1-3% of RESURS.
- Mileage of my car is 38 000 km. Can I use RESURS?
We recommend using RESURS if your car has run more than 60 000 km. For new cars you can apply RESURS 50g to protect your engine.
- Do you have RESURS for motos?
Yes. We have RESURS MOTO. It should be applied in 2 or 4 stroke engines but ONLY WITH SPLIT LUBRICATING SYSTEM and in DRY-SUMP oil system for motors. It is not suitable for for wet-sump oil systems.
- Can I use RESURS after another additive?
Yes, you can. But before applying RESURS we strictly recommend changing oil.
- If I use RESURS 2 times more will I have better effect?
To get better result you should apply between 1 and 3% of RESURS to your car engine. Don’t put in more than it is necessary. To achieve best results use 50g after 1000 km again.
- Is RESURS safe to use in my engine?
Yes, RESUSR is a lubricant that enhances lubrication of your engine. That means better protection against engine wear than you can get from using plain motor oil or motor oil containing other types of additives.
- Where can I buy RESURS?
You can see full list of distributors in "contacts" and contact them directly. If you don't find your country there please send us an email and we will contact you to arrange the sending.
For more information please call 00 7 812-601-05-53
|
| |
|
